Home / Boards / Raspberry Pi

Raspberry Pi boards

Full Linux computers with a 40-pin GPIO header.

A Raspberry Pi board with its 40-pin GPIO header highlighted along the top edge

A Raspberry Pi is a complete computer the size of a credit card. It runs Linux from a microSD card or SSD, connects to screens, keyboards and networks, and has a 40-pin header for electronics. That makes it the right choice when a project needs a desktop, a camera, a web server, a database or AI models, as well as hardware control.

The main models compared

Raspberry Pi 5Raspberry Pi 4 Model BRaspberry Pi Zero 2 W
ChipBroadcom BCM2712, quad-core Arm Cortex-A76Broadcom BCM2711, quad-core Arm Cortex-A72RP3A0, quad-core Arm Cortex-A53
Clock2.4 GHz1.8 GHz1 GHz
RAM1, 2, 4, 8 or 16 GB1, 2, 4 or 8 GB512 MB
WirelessDual-band 802.11ac Wi-Fi, Bluetooth 5.0Dual-band 802.11ac Wi-Fi, Bluetooth 5.02.4 GHz 802.11 b/g/n Wi-Fi, Bluetooth 4.2
Power5 V 5 A over USB-C (Power Delivery)5 V 3 A over USB-C5 V over micro USB
ExtrasPCIe 2.0 x1 for NVMe SSDs and AI accelerators, real-time clock, power buttonGigabit Ethernet, 2 × USB 3.0Tiny and low power. GPIO header comes unpopulated
GPIO40-pin header, 3.3 V40-pin header, 3.3 V40-pin footprint, 3.3 V

Figures from the manufacturer's documentation, listed under Sources.

Which one should you get?

Get a Pi 5 for anything demanding: running AI models locally, a home server, or a desktop. Use the official 27 W power supply, because the Pi 5 limits USB current on weaker ones. A Pi 4 is still very capable and sometimes cheaper. A Zero 2 W suits small, always-on jobs like a sensor logger or a network gadget. If your project only reads sensors and drives outputs, a Pico is cheaper, boots instantly and is harder to corrupt by pulling the power.

Things that catch people out

  • 3.3 V GPIO, and no protection. A 5 V signal on a GPIO pin can destroy the processor. There's no ADC either, so analogue sensors need an external converter.
  • Shut down properly. Pulling the power while Linux is writing can corrupt the SD card. Run sudo shutdown now first, or use the Pi 5's power button.
  • Power supply problems look like software problems. A weak supply causes random crashes and a lightning-bolt warning. Use the supply Raspberry Pi recommends for your model.
  • GPIO numbers aren't pin numbers. GPIO 17 is physical pin 11. Our pinout lists both.

Sources