Home / Boards / ESP32

ESP32 boards

Wi-Fi and Bluetooth built in, from many makers.

An ESP32 development board with two rows of 19 pins, the metal-shielded module and antenna at the top and the USB socket at the bottom

ESP32 is a family of chips from Espressif with Wi-Fi, and usually Bluetooth, built in. They're sold on boards from Espressif and dozens of other companies, which keeps them cheap. They're the usual choice for smart-home sensors and anything that talks to the internet, and you can program them with Arduino C++, MicroPython or Espressif's own ESP-IDF.

The main models compared

CPUMax clockSRAMGPIORadio
ESP32 (original)Dual Xtensa LX6240 MHz520 KB34Wi-Fi 4, Bluetooth Classic and LE
ESP32-S3Dual Xtensa LX7240 MHz512 KB45Wi-Fi 4, Bluetooth LE
ESP32-C3Single RISC-V160 MHz400 KB22Wi-Fi 4, Bluetooth LE
ESP32-C6RISC-V160 MHz512 KB30Wi-Fi 6, Bluetooth LE, 802.15.4 (Thread, Zigbee)
ESP32-C5RISC-V240 MHz384 KB29Dual-band Wi-Fi 6, Bluetooth LE, 802.15.4
ESP32-P4Dual RISC-V400 MHz768 KB55None: pair it with a wireless chip

Figures from the manufacturer's documentation, listed under Sources.

Which one should you get?

For your first ESP32, get a board with the original ESP32 or an ESP32-S3, from Espressif or a well-known maker, because they have the most tutorials. The S3 adds native USB and is the pick for camera and machine-learning projects. The C3 is a cheap, simple option for small sensors. The C6 is the one for Thread and Matter smart-home devices. Board layouts vary a lot between makers, so always use the pin diagram for the exact board you bought.

Things that catch people out

  • Some pins are off-limits. On the original ESP32, GPIO6 to 11 belong to the flash memory, and five strapping pins control how the chip boots. Our ESP32 pinout lists the safe ones.
  • ADC2 stops working with Wi-Fi on on the original ESP32. Put analogue sensors on ADC1 pins.
  • Brownouts during Wi-Fi. Transmitting draws short bursts of current, and a weak USB cable or regulator makes the board reset. Espressif asks for a supply that can deliver at least 500 mA.
  • 3.3 V logic. Don't connect 5 V signals directly.

Sources