Home / Circuit lab
Circuit lab
Interactive circuits you can play with. Drag a slider to change a component and watch the current flow, the voltages and the waveforms change straight away. Each circuit has challenges to solve, from lighting an LED to taming a buck converter.
Every simulator uses the real circuit equations, and each page explains its model and where real parts differ. Your challenge progress is saved in this browser.
Beginner
LED and resistor
Change the supply, resistor and colour and watch the current, brightness and heat.
5 challenges →BeginnerLoaded voltage divider
See why a divider's output sags when you connect something to it.
4 challenges →Intermediate
RC charging
Charge and discharge a capacitor and see the time constant in action.
5 challenges →IntermediateRC filter
Sweep the frequency and see the gain, phase and Bode plot change.
4 challenges →IntermediateTransistor switch
Drive a load from a microcontroller pin and find saturation.
4 challenges →Intermediate555 timer
Set R1, R2 and C and make the LED blink at your chosen rate.
4 challenges →Advanced
Op-amp amplifier
Set the gain, push it into clipping and find the bandwidth limit.
4 challenges →AdvancedRLC step response
Make a circuit ring, then damp it down. See damping ratio and Q.
4 challenges →AdvancedBuck converter
Step voltage down efficiently. Size the inductor and avoid discontinuous mode.
3 challenges →