Home / Reference

Pinouts and reference

Pinouts and definitions to keep open in a tab while you work, all checked against the official documentation.

Reference

Raspberry Pi GPIO pinout: the 40-pin header explained

Every pin on the Raspberry Pi's 40-pin header, with GPIO numbers, I²C, SPI, UART and PWM pins, power limits, and the mistakes that damage boards.

Reference

Raspberry Pi Pico pinout: every pin explained

The Raspberry Pi Pico and Pico 2 pinout with GPIO, ADC, I²C, SPI and UART pins, the power pins, and safe current and voltage limits.

Reference

Arduino Uno pinout: digital, analogue, PWM and power pins

The Arduino Uno R3 pinout explained: digital and analogue pins, PWM, I²C, SPI, serial, interrupts, the power header and safe current limits.

Reference

Electronics and AI glossary: plain-English definitions

Short, plain-English definitions of the electronics, coding and AI terms used across Ohm & Token, from ADC and baud rate to tokens and voltage dividers.

Reference

ESP32 pinout: which pins are safe to use (ESP32-DevKitC)

The ESP32-DevKitC pinout with every header pin, plus which GPIOs to avoid: flash pins, strapping pins, input-only pins and ADC2 with Wi-Fi.

Reference

BS 7671 test values cheat sheet: Zs, insulation resistance, RCDs and continuity

The figures you check against when testing an installation in the UK: maximum measured Zs, insulation resistance minimums, RCD trip times, ring circuit continuity and typical Ze.

Reference

RCD types explained: AC, A, F and B, and which one you need

What the different RCD types detect, why type AC is now restricted in BS 7671, and which type suits washing machines, heat pumps, solar inverters and EV chargers.