Home / Editorial standards

How we check our work

Ohm & Token is a reference you should be able to trust with a soldering iron in one hand. These are the rules every page follows.

Facts come from primary sources

Every number and technical claim is checked against the most direct source we can find: the manufacturer's datasheet, the relevant standard, the official documentation, or the original research paper. Each guide and tool lists its main sources at the end, with links where the source is freely available. Some standards, such as BS 7671 and IPC-2221, are paid documents, and we name them without a link.

Tools are tested before they go up

  • Known answers. Each calculator's maths is kept separate from the page and run against worked examples from datasheets, standards and textbooks. For example, the cable voltage drop tool is checked against the mV/A/m values in BS 7671, and the decibel tool against standard reference levels.
  • Bad input. We try empty boxes, zero, negative numbers, huge values and nonsense, and make sure the tool explains the problem instead of showing a wrong answer.
  • Every screen. Every page is checked on a phone-sized and a desktop-sized screen, in light and dark mode, before each release.

Code is run, not just read

Code samples are run before they're published. Project code for the Raspberry Pi Pico is run against a simulated Pico that checks the timing, the pins and what happens when things go wrong, such as a sensor that isn't connected. Wiring is checked pin by pin against the official pinout. We say clearly on each project how it was tested.

Buying guides are based on specifications

Unless a guide says otherwise, we haven't tested the products hands-on. Recommendations come from the manufacturers' published specifications and safety ratings, and each guide says so. Prices change, so we don't quote them.

AI information is dated

AI models and prices change quickly. Pages that mention them say when the figures were checked, and the prices in the AI cost calculator come from each provider's official pricing page.

Corrections

If you find a mistake, please tell us. We check every report against the source, fix confirmed errors quickly, and update the page's date.

Safety

Our electronics guides and projects use low voltages. Where a page touches on mains electricity, it is for understanding only. Mains installation work must follow BS 7671 in the UK, or your local wiring rules, and be done or checked by a competent person.

Advertising

The site is funded by advertising, and may later include affiliate links, which will be labelled. Advertisers have no say in what we write or recommend.