Arduino and Raspberry Pi are the two names everyone hears first, and they're often compared as if they're the same kind of thing. They aren't. One is a microcontroller and one is a full computer, and that difference decides which suits your project.
The short answer
- Arduino (and other microcontroller boards, including the Raspberry Pi Pico) runs one program, starts instantly, uses very little power and is excellent at reading sensors and controlling hardware precisely.
- Raspberry Pi (the Pi 4, Pi 5 and similar) is a small Linux computer. It can run a desktop, a web server, Python with large libraries, a camera and AI models, but uses more power and takes time to boot.
Note the naming trap: the Raspberry Pi Pico is a microcontroller board, much more like an Arduino than like a Raspberry Pi 5.
Side by side
| Microcontroller (Arduino, Pico, ESP32) | Single board computer (Raspberry Pi 5) | |
|---|---|---|
| Runs | One program, no operating system | Linux, many programs at once |
| Start-up | Instant | Tens of seconds |
| Power use | Milliamps, and microamps when asleep | Several watts |
| Analogue inputs | Yes, built in | No, needs an add-on ADC chip |
| Timing | Precise and predictable | Can be interrupted by the operating system |
| Languages | C/C++ (Arduino), MicroPython, CircuitPython | Almost anything, usually Python |
| Storage | Kilobytes to a few megabytes | A memory card or SSD |
| Switching it off | Just pull the power | Best shut down properly to protect the card |
Choose a microcontroller when…
- It runs on batteries for weeks or months.
- You're reading sensors, driving motors or LEDs, or need precise timing.
- It should work the moment it's powered on.
- You're learning electronics. Fewer layers between your code and the hardware makes it easier to understand.
Choose a Raspberry Pi when…
- You need a screen, a desktop, a camera or a web interface.
- You want to run AI models locally, such as image recognition or small language models.
- Your program needs lots of memory, storage or Python libraries.
- It needs a full network stack: file sharing, a database, a home server.
What about AI projects?
For AI, the line is fairly clear. A Raspberry Pi 5 can run real models: image classifiers, object detection, speech recognition, and small language models (slowly). Add-on accelerator boards make vision models much faster.
Microcontrollers can run tiny models too, a field called TinyML, for jobs like recognising a wake word or a gesture from sensor data. Many projects combine both: a microcontroller handles the sensors and motors, and talks to a Pi or a cloud API that does the heavy AI work.
Using both together
A common pattern for robots and smart devices is a Raspberry Pi as the "brain", connected by USB or serial to a microcontroller that handles real-time hardware control. You get the best of both.
Not sure which microcontroller board to pick? See the best microcontroller boards for beginners.
Going deeper
Real-time behaviour
Linux on a Raspberry Pi shares the processor between many tasks, so a program that toggles a pin every millisecond may occasionally be delayed much longer while the system does something else. That's fine for most jobs, but not for generating precise pulses or reading fast signals. A microcontroller running one program, especially using hardware timers and interrupts, responds within microseconds every time.
Talking between a Pi and a microcontroller
The simplest link is USB: the microcontroller appears as a serial port. On the Pi, the pyserial library sends and receives lines of text:
import serial # pip install pyserial
with serial.Serial("/dev/ttyACM0", 115200, timeout=1) as port:
port.write(b"LED ON\n")
reply = port.readline().decode().strip()
print("Board replied:", reply)
The microcontroller reads each line and acts on it. Keep messages short and simple, and add a reply so the Pi knows the command arrived. The port name varies by board: list ports with python -m serial.tools.list_ports.
Other options include a UART connection on the GPIO pins, I²C (good for several devices on two wires) and SPI (faster, for displays and data-heavy sensors).
Voltage levels
Raspberry Pi GPIO pins use 3.3 V logic and are not 5 V tolerant. Connecting a 5 V Arduino's output straight to a Pi input can damage the Pi. Use a level shifter or a simple resistor divider on signals going into the Pi.
Power budgets
A Raspberry Pi 5 is designed to use its official 5 V, 5 A USB-C supply, especially when powering USB devices. A microcontroller can run for months on batteries if it spends most of its time in deep sleep and wakes only to take readings. That difference often decides the design: a battery-powered sensor is usually a microcontroller, sending data to a Pi or server that's plugged in.
Sources
The main references behind this guide. Numbers we worked out ourselves, such as the code outputs, come from running the code.