How to read a resistor colour code
Hold the resistor so the tolerance band is on the right. It is usually gold or silver on 4 band resistors, often brown on 5 band ones, and set slightly apart from the others. Then read from left to right:
- Digit bands. The first two bands (three on 5 and 6 band resistors) are digits. Brown is 1, red is 2, and so on.
- Multiplier band. The next band says how many zeros to add. Red means ×100, orange ×1,000.
- Tolerance band. How far the real value may be from the printed one. Gold is ±5%, brown is ±1%.
- Temperature coefficient (6 band only). How much the value drifts as the resistor heats up, in parts per million per kelvin.
Resistor colour code chart
| Colour | Digit | Multiplier | Tolerance | Tempco (ppm/K) |
|---|---|---|---|---|
| Black | 0 | ×1 | – | 250 |
| Brown | 1 | ×10 | ±1% | 100 |
| Red | 2 | ×100 | ±2% | 50 |
| Orange | 3 | ×1k | ±0.05% | 15 |
| Yellow | 4 | ×10k | ±0.02% | 25 |
| Green | 5 | ×100k | ±0.5% | 20 |
| Blue | 6 | ×1M | ±0.25% | 10 |
| Violet | 7 | ×10M | ±0.1% | 5 |
| Grey | 8 | ×100M | ±0.01% | 1 |
| White | 9 | ×1G | – | – |
| Gold | – | ×0.1 | ±5% | – |
| Silver | – | ×0.01 | ±10% | – |
| None | – | – | ±20% | – |
Tolerance and temperature values follow the IEC 60062 standard. Older charts sometimes list grey as ±0.05%, so check the datasheet if precision matters.
A memory aid for the colours
The digit colours run black, brown, red, orange, yellow, green, blue, violet, grey, white, which is 0 to 9. From red to violet they follow the rainbow, so if you remember "black and brown come first, then the rainbow, then grey and white", you have the whole list.
What are E12, E24 and E96?
Resistors are only made in certain standard values, called E-series. E12 has 12 values per decade (10, 12, 15, 18, 22 and so on) and is common for ±10% parts. E24 has 24 values and suits ±5% parts. E96 has 96 values for ±1% precision resistors. If your design needs a value that isn't in a series, the calculator shows the nearest one you can actually buy.
Common mistakes
- Reading it backwards. If you get a value that isn't a standard one, try reading from the other end.
- Mixing up red, orange and brown. Under warm lighting these look alike. Check with a multimeter if you're unsure.
- Forgetting the multiplier can be gold or silver. In the multiplier position, gold means ×0.1 and silver means ×0.01, used for values under 10 Ω.