Home / Tools / Series and parallel resistor calculator

Series and parallel resistor calculator

Enter your resistors to see their total resistance connected in series and in parallel. Values like 4.7k, 4k7 and 1M all work.

  • Electronics tool
  • Runs in your browser
  • Tested 19 November 2026
  • Sources
In series
In parallel

Resistors in series

Connected end to end, the same current flows through every resistor, and the resistances simply add up:

R_total = R1 + R2 + R3 + …

The total is always larger than the biggest resistor. 1 kΩ + 2.2 kΩ = 3.2 kΩ.

Resistors in parallel

Connected side by side, the current splits between them. The total is always smaller than the smallest resistor:

1 / R_total = 1 / R1 + 1 / R2 + 1 / R3 + …

For just two resistors there's a handy shortcut: R_total = (R1 × R2) / (R1 + R2). So 1 kΩ and 2.2 kΩ in parallel give (1 × 2.2) / 3.2 = 0.6875 kΩ, or 687.5 Ω.

Quick check: two equal resistors in parallel give half the value. Two 10 kΩ resistors make 5 kΩ.

Why combine resistors?

  • To make a value you don't have. Two 470 Ω resistors in series make 940 Ω.
  • To share the heat. Two resistors in parallel each carry part of the current, so each dissipates less power.
  • To divide a voltage. Two resistors in series form a voltage divider.

Sources

Where the formulas and figures on this page come from. We test every tool against worked examples from these before publishing.

  • Ohm's law (V = IR) and Joule's law (P = VI), standard circuit theory