Home / Tools / Ohm's law calculator

Ohm's law calculator

Enter any two values and the calculator works out the other two. Pick the units from each menu.

  • Electronics tool
  • Runs in your browser
  • Tested 19 November 2026
  • Sources
Voltage
Current
Resistance
Power

Highlighted values are the ones you entered.

The formulas

Ohm's law links voltage (V, in volts), current (I, in amps) and resistance (R, in ohms). Power (P, in watts) comes from the voltage and current together. With any two known, you can find the rest:

To findUsing V and IUsing V and RUsing I and R
Voltage––V = I × R
Current–I = V / R–
ResistanceR = V / I––
PowerP = V × IP = V² / RP = I² × R

If you know the power and one other value, the same formulas rearrange. For example, from power and resistance: V = √(P × R) and I = √(P / R).

Worked example. A 12 V heater draws 2 A. Its resistance is 12 / 2 = 6 Ω, and it uses 12 × 2 = 24 W.

Where it applies

Ohm's law describes resistors and other "ohmic" parts, where current rises in proportion to voltage. Some parts don't behave that way. An LED, for instance, barely conducts until it reaches its forward voltage and then conducts very easily. That's why an LED needs a series resistor, and why there's a separate LED resistor calculator.

New to all this? How resistors work explains it from scratch.

Sources

Where the formulas and figures on this page come from. We test every tool against worked examples from these before publishing.

  • Ohm's law (V = IR) and Joule's law (P = VI), standard circuit theory