The formulas
- Capacitive reactance:
XC = 1 / (2π f C). It falls as frequency rises, which is why capacitors block DC but pass high frequencies. - Inductive reactance:
XL = 2π f L. It rises with frequency, so inductors pass DC and block high frequencies. - Resonant frequency:
f0 = 1 / (2π √(L C)), the frequency where XL = XC.
Reactance is measured in ohms like resistance, but it doesn't turn energy into heat. A capacitor or inductor stores energy and gives it back each cycle, and the current is 90° out of step with the voltage.
Q factor and bandwidth
For an inductor and capacitor in series with a resistance R, which is often just the inductor's own winding resistance, Q = (1/R) × √(L/C). The higher the Q, the sharper the resonance. The bandwidth between the two −3 dB points is f0 / Q. The calculator shows these when you enter a resistance.
In real circuits
- Real capacitors have some series inductance, and real inductors have some capacitance between their turns, so every part has its own self-resonant frequency. Above it, a capacitor behaves like an inductor. This is why decoupling often pairs a large capacitor with a small one.
- Inductors with magnetic cores lose inductance as the current rises towards saturation. Check the datasheet's saturation current.
- Electrolytic capacitors are only rated for small AC ripple currents. Never put a polarised capacitor directly across mains.
See reactance shape a signal in the RC filter and RLC step response simulators.